WELCOME TO OUR BLOG

We're sharing knowledgein the areas which fascinate us the most
click

How to Cross-Reference F-806149.03.TR1 with 806149 Bearings

От bearingoffer November 5th, 2026 11 просмотров

Introduction: Cross-referencing F-806149.03. TR1 with 806149 bearings starts by treating every model string as a clue, then confirming the physical envelope and variant details against the old part, drawing, and supplier review.

A partly legible old bearing number can stall a rush inquiry. A distributor receives a photo of a scored bearing cone, reads “806149” from the stamping, and sees F-806149.03. TR1 copied from an invoice nobody can fully read. The three strings may describe one bearing family, but the parts desk still has to decide whether to quote, request more information, or ask a supplier to review the old part. A clear cross-reference workflow keeps that decision moving without turning a ten-minute inquiry into a week-long project.

Why 806149 and F-806149.03 Are Model Clues Rather Than Compatibility Proof

F-806149.03. TR1 carries related model markings F-806149.03 and 806149. All three strings point to a single-row tapered roller bearing with a 55 mm bore, 85 mm outer diameter, and 0.40 kg unit weight. The shared core identifies the family and confirms the physical envelope, which gives a distributor parts specialist a practical starting point when paperwork is incomplete. The prefix F-, the . 03 segment, and the TR1 suffix are the characters that usually distinguish one build from another, because those characters often record a manufacturer-specific series, internal variant, or assembly configuration. Two bearings can share every digit and still differ in internal construction, cage design, chamfer detail, or assembled width. A tapered roller bearing manufacturer may use the same envelope across several suffixes, and each manufacturer can assign its own series codes. A practical comparison note is to read the strings in layers. 806149 is the shortest numeric clue and is useful for catalogue and stock searches. F-806149.03 adds a prefix and a decimal segment, so it can point to a manufacturer or distributor variant rather than a separate family. F-806149.03. TR1 adds a suffix that may describe an internal build, assembly code, or regional specification. The layering matters because distributor staff can quickly see which part of the string should be searched, which part should be photographed, and which part should be sent to a supplier for review. It also keeps invoice references, old-bearing stampings, and replacement candidates in separate fields, so a readable invoice number never gets confused with the marking on the old bearing. The shared digits help you search stock and catalogues; the bore and outer diameter help you test whether a candidate can fit the housing. The old part, drawing, or assembly photo then shows whether the candidate matches the bearing the assembly was built around. The known dimensions are 55 mm bore, 85 mm outer diameter, and 0.40 kg weight; assembly width remains a detail to record from the old part or drawing and confirm during supplier review. Treat the related markings as search clues and use dimensions, drawings, and old-part markings for the interchange decision.

Which Old-Part Details Make a Cross-Reference Request Useful

Most cross-reference delays start with incomplete input. A message that says “need 806149, send price” leaves the supplier choosing between a guess and three follow-up questions. A usable request front-loads the physical evidence, and a phone camera, caliper, and a few minutes at the bench cover most of it.

  • Markings from every face of the old bearing. Photograph the cup face, cone face, and back face, and keep laser etching, ink stamping, and etched lot codes in frame. Faint characters near the F-806149.03. TR1 string may be a production code; keeping them in frame helps a supplier separate model information from batch information.
  • Caliper readings for bore, outer diameter, and assembled width. The 55 mm bore and 85 mm outer diameter narrow the search fastest, and measuring the actual part catches a misread number early. Record the assembled width while the old bearing is still on the bench, then confirm it against the drawing or old part.
  • A drawing, parts-diagram screenshot, or photo of the bearing in its housing. These details show the shoulder, cup seat, and assembly load path. A clear photo of the installed position often explains why a candidate with the right envelope still needs a second review.
  • Application context and order size. State where the bearing sits in the driveline, how many sets the customer needs, and the required date. That combination lets the supplier match the review effort to the order and confirm whether the request is a stock pull or a longer sourcing job.

Supplier cross-reference support becomes necessary when the old part has a suffix missing from the drawing, when the assembled width is unknown, or when the housing shows a shoulder that limits axial space. In those cases, a parts specialist should stop matching text and send the evidence package for review. The strongest request is often not the longest message but the one that makes each fact traceable: old marking, invoice string, measured bore, measured outer diameter, measured width, application position, and quantity.

How to Hand Off a Cross-Reference Request Without Overstating the Result

The handoff should read like a short briefing. Start with what is solid: markings photographed from the old part, measured bore, outer diameter, assembled width, and the vehicle or assembly position. Label each string by source, for example “marking on old bearing: 806149,” “number on old invoice: F-806149.03. TR1,” and “candidate from the supplier: F-806149.03. ” Source labels keep an invoice reference from being treated as a manufacturer’s part number and prevent a review from starting on the wrong foundation. Smart Bearing supplies F-806149.03. TR1 as a single-row tapered roller bearing with related markings F-806149.03 and 806149, Made in Korea, with reference stock of around 175 to 176 sets confirmed against live availability at the time of inquiry. When an old-part photo set and caliper readings arrive, the comparison checks the candidate against those markings and dimensions and flags the next detail needed for a complete review, usually the assembled width or a variant within the number family. The reply identifies the closest reviewed candidate and the dimensions covered. Pass the result to the counter with precise wording: the bearing has been cross-referenced against the old part and measurements supplied, and the review covers the dimensions listed. A clean handoff also includes a short comparison note for the quote file: old marking, invoice string, measured bore, measured outer diameter, measured width, application position, quantity, and candidate string. If the old part and invoice disagree, send both strings and explain which one came from the bearing itself. Keep that wording attached to the specific old part. A different unit from the same family may carry a different suffix, and precise language protects the counter, the workshop, and the supplier relationship.

Conclusion

The three strings around F-806149.03. TR1 are useful clues that work best together. Use 806149 and F-806149.03 to identify the family, use the known 55 mm bore and 85 mm outer diameter to confirm the envelope, and use old-part photos, caliper readings, and a drawing to close the decision. When you quote this bearing for a distributor account, send the markings, the three measurements, the assembly position, and your required quantity to an auto bearing supplier that will review the old part as well as the number. Smart Bearing can review that package against the related markings and known dimensions and tell you what the evidence supports before you commit.

FAQ

Q: Are 806149 and F-806149.03 interchangeable without a drawing review?

A: Treat them as related model clues for the same 55 mm bore and 85 mm outer diameter bearing family. A supply decision also needs the assembled width, internal variant, and markings on the old part, checked against a drawing or old-part review.

Q: What old-part information helps a cross-reference review for F-806149.03.TR1?

A: Clear photos of every marked face, caliper readings for bore, outer diameter, and assembled width, a drawing or photo of the bearing in its housing, and the driveline position plus the number of sets you need. That package lets a supplier compare the candidate against real evidence instead of matching text.

Q: Can a parts specialist confirm compatibility from the model string alone?

A: A model string is a starting point: it identifies the family and often the manufacturer’s variant code, while fit is confirmed by dimensions, tolerances, and the assembly position.

Sources / References

Motion + Power Manufacturers Alliance

Applied Sciences - MDPI

Related Examples

F-806149.03.TR1 Automobile Bearing F-806149.03 Roller Bearing 806149 - Stock for Sale

Назад
Single Row and Double Row Ball Bearings in Gearbox Shafts
Читать далее
Далее
What Does 55x85 Mean on a Tapered Roller Bearing?
Читать далее